| 详细介绍 |
|
Wide frequency range : 0.02Hz to 2MHz in 7 range
4-in-1 sweep, function & pulse generator and frequency counter
Versatile waveforms : Sine, Triangle, Ramp, Pulse sawtooth and DC output
Built-in 6 digit internal and external counter display (Max. 50MHz)
Internal and external linear sweep control from 1 : 1 to 100 : 1
Low distortion factor less than 1% at 0.2Hz to 100kHz
TTL and CMOS leveled square wave output
Variable DV offset control
Variable symmetry to generate sawtooth and pulse waveform
Variable output level control with 20dB attenuator and amplitude control |
| 功能描述 |
|
| Output waveform |
Sine, Triangle, Square, Pulse sawtooth, Ramp, TTL, CMOS |
| Frequency range |
0.02Hz～2MHz in the 7 ranges |
| Frequency accuracy |
1 count |
| Input voltage |
0 to 10V(DC + AC peak) |
| Frequency variable range |
100 : 1 or more |
| DC offset |
【10V(without load), 【5(with load) |
| Symmetrical variable range |
10 : 1 to 1 : 10 or more |
| Distortion |
less than 1%(0.2Hz ~ 100kHz) |
| Rise / fall time |
less than 110ns |
| Linearity |
less than 1% up to 100kHz and less than 5% up to 2MHz |
| Output |
TTL level |
| Rise/fall time |
less than 25ns |
| Output |
4V～15V 【 1V, continuously variable |
| Rise/fall time |
less than 110ns (at Max. output level) |
| Width |
1 : 1 to 100 : 1 |
| Rate |
20ms to 2s (50hz to 0.5Hz) |
| Internal sweep |
linear |
| External sweep |
by means of VCF input |
| Output voltage |
20Vp-p (open circuit), 10Vp-p(into 50з) |
| Attenuator |
-20dB |
| Impedance |
50з 【 5% |
| Display |
6 digit green LED(0.2Hz ~ 50MHz) |
| Accuracy |
time base error 【 1 counter |
| Input sensitivity |
100mV on kHz range and 300mV on MHz range |
| Max. input voltage |
150Vrms at 1kHz |
| Operating environmen |
0∩ ~ 35∩, 85% RH |
| Range for guaranteed |
25∩【 5∩, 75% RH |
| Power requirement |
AC 115 / 230V 【 10%, 50/60Hz |
| Power consumption |
approx. 20W |
| Accessories |
power cord, fuse, operation manual, BNC cable |
| 物理特性 |
|
| 长度 |
260mm |
| 宽度 |
255mm |
| 高度 |
80mm |
| 持有证书 |
|
| |
CE |
| |
