| 详细介绍 |
|
Dual-channel digital oscilloscope ScopeDAQ allows the user to capture the data with frequency 100MHz. Higher sampling frequency (200MHz) is available in case of using one channel.
Basic version of the instrument is equipped with 128K data buffer, optionally it can be enlarged up to 512KB.
2-channel Digital Oscilloscope
Maximum sampling rate:
200MHz - 1 analog channel
100MHz - 2 analog channels
ADC resolution: 8 bits
Analog bandwidth: 20MHz
Input voltage range: 25V (probe 1:1)
128KB data buffer (optionally 512KB)
Spectral Analysis (FFT)
Easy to use software
|
| 功能描述 |
|
| Sampling rates |
200MHz*, 100MHz, 50MHz, 20MHz, 10MHz, 5MHz, 2MHz, 1MHz, 500kHz, 200kHz, 100kHz, 50kHz, 20kHz, 10kHz, 5kHz, 2kHz, 1kHz, 500Hz, 200Hz |
| Analog inputs |
2 channels analog gains: 5V/div, 2V/div, 1V/div, 500mV/div, 200mV/div, 100mV/div, 50mV/div, 20mV/div (5 divs) maximum input voltage: 25V (probe 1:1) ADC resolution: 8-bits analog bandwidth: 20MHz coupling: AC, DC input impedance: 1MOhm, 15pF |
| Data buffer |
Variable: 256, 512, 1024, 2048, 4096, 8192, 16384, 32768, 65536, 131072, 262144*, 524288* samples |
| Trigger (analog) |
Level triggering (rising or falling edge) with noise reduction feature, |
| Trigger level |
Variable threshold level for analog signals (full range) |
| Capture delay |
Depending on sampling rate: for 200MHz max. 500ms, for 100Mhz - 1s, etc. |
| Pre- and Post Trigger buffers |
Variable size of Pre- and Post Trigger buffers |
| Power supply |
External, 5V/1A |
| Dimensions |
Width: 110mm, length: 130mm, height: 42mm |
| Software |
Easy to use Windows™ application, Most important functions and parameters directly available on main screen.Features: measurement cursors (voltage, time, frequency),reference signals, zoom, signal prints, configuration save. |
| System requirements |
Pentium II or compatible, USB port, minimal screen resolution: 800 x 600 pixels (High Color). |
| Set contents |
ScopeDAQ instrument, power supplier, USB cable, CD with software |
| 相关产品 |
|
| |
RK 虚拟示波器 ScopeDAQ-12
|
  |
