| 详细介绍 |
|
Wide frequency range : 0.02Hz to 2MHz
Combination of analog and digital oscilloscope performance.
Versatile waveforms : Sine, Triangle, Square, Ramp and Pulse sawtooth
Low distortion factor less than 1% at 10Hz to 100kHz
TTL leveled square wave output
Linear sweep control from 1: 1 to 100 : 1
Variable symmetry to generate sawtooth and pulse waveform
DC offset control
Maximum attenuation of 20dB can be obtained |
| 功能描述 |
|
| Output waveform |
Sine, Triangle, Square, Pulse sawtooth, Ramp, TTL, CMOS |
| Frequency range |
0.02Hz~2MHz in the 7 ranges |
| Frequency accuracy |
【8% of full scale to 2MHz |
| Input voltage |
0 to 10V(DC + AC peak) |
| Frequency variable range |
100 : 1 or more |
| DC offset |
【10V(without load), 【5(with load) |
| Symmetrical variable range |
10 : 1 to 1 : 10 or more |
| Distortion |
less than 1%(0.2Hz ~ 100kHz) |
| Rise / fall time |
less than 100ns |
| Linearity |
less than 1% up to 100kHz and less than 5% up to 2MHz |
| Output |
TTL level |
| Rise/fall time |
less than 25ns |
| Width |
1 : 1 to 100 : 1 |
| Rate |
20ms to 2s (50hz to 0.5Hz) |
| Internal sweep |
linear |
| External sweep |
by means of VCF input |
| Output voltage |
20Vp-p (open circuit), 10Vp-p(into 50з) |
| Attenuator |
-20dB |
| Impedance |
50з 【 5% |
| Operating environments |
0∩～35∩, 85% RH |
| Range for guaranteed |
25∩【 5∩, 75% RH |
| Power requirement |
AC 115 / 230V 【 10%, 50/60Hz |
| Power consumption |
approx. 20W |
| Accessories |
power cord, fuse, operation manual, BNC cable |
| 物理特性 |
|
| 长度 |
260mm |
| 宽度 |
210mm |
| 高度 |
76mm |
| 持有证书 |
|
| |
CE |
  |
